Large Assortment of Triumph Parts

Large Assortment of Triumph Parts

Please note: these parts are only available as ONE lot. Any individual parts inquiries will be passed on to the buyer of the lot.

5 8-stud pre-unit 650cc barrels, 3 with pistons, 1 has fin damage
14 9-stud T120 650 barrels, 2 with pistons, 8 with tappet blocks
3 BRAND NEW 750cc complete kits
3 Rout 750cc kits including pistons
CASES
1 PR Unstamped Pre-Unit generator case
1 PR Unstamped T120R cases
1 PR 1967 T120
1 PR 1965 TR6SS
1 PR 1966 TR6C
1 PR 1966 T120R
1 PR 1967 T120R with crank
1 PR 1971 TR6R cases complete minus primary
1 1969 T120R LH Case only
1 1967 T120R LH Case only
4 Late model T120 primary covers
9 Early T120 Unit covers
2 Rigid frame primary cases complete (Inner & Outer)
1 Rigid frame primary cover (outer)
1 Swing arm frame pre-unit primary cover (inner)
3 8-stud alloy heads
1 1959 Bonneville alloy head, fully rebuilt valves, guides, springs, & dual carb manifold
9 T120R 9-stud heads (2x complete, 2 with new guides
3 TR6 unit 9-stud heads
2 500cc unit heads
11 Pairs Unit 650cc tappet boxes
4.5 Pairs Pre-Unit tappet boxes
2 Pairs T100SS rocker boxes
5 Dunlop WM 3×19″ rims
7 Dunlop WM 3×18″ rims
2 Akront WM 2.15×18″ deep flange alloy rims, 36-hole
1 Akront WM 2.15×18″ deep flange rim, 30-hole
1 Akront WM 2.15×18″ deep flange smooth rim, 40-hole
10 Unit 650cc oil tanks
3 Early unit oil tanks
1 Trident T150 oil tank
2 5T Rigid frame oil tank
2 Pre-unit swingarm frame oil tanks
3 Lucas K2FC magnetos – 2 working, 1 for rebuild
2 BTH KC2 magnetos  – 1 working, 1 for rebuild
Assorted NOS and used Lucas electrical spares
Assorted NOS and used headlight ears, shrouds
NEW PISTON SETS:
3 650cc – +.20, .40, .60 over
1 650cc Cyclecraft, +.20 over
4 650cc MC, +.70 over
1 A&E, +.20 over
4 Robins, +.60 over
40+ Misc. Ring Sets
10 sets Used 650cc pistons
3 sets Used 500cc pistons
15 pairs Unit 650 con-rods
1 pair Pre-Unit con-rods
2 pairs 500cc con-rods
1 pair Norton con-rods
Assorted Fork gaiters and knee pads
Assorted Handlebar grips
Assorted Control Cables
SPEEDO/TACHOMETER
3 pairs Greyface
2 pairs Blackface
Chronometric bezels & glass
Assorted Tacho Drives
CARBS
8 Monoblocs, complete
6 Monoblocs, for rebuild
3 Monoblocs, chopped
12 Concentrics, complete
12 Concentrics, for rebuild
1 set 34mm Mikuni, complete T120R
1 set NEW 30mm Mikuni, complete T120R
2 pairs Unit forks
1 pair Norton short Roadholders
2 sets NEW T120 tubes
2 sets Used T120 tubes
Assorted NOS carb parts: kits, jets, needles, slides, etc.
10 Unit 650 transmission inner covers
10 Unit 650 transmission outer covers
2 Pre-unit dynamo timing covers
3 T120 Unit timing covers
PRE-UNIT TRANSMISSIONS
4 Used outer covers
2 NOS outer covers
2 Complete Pre-unit swingarm transmissions
3 Complete Pre-unit rigid frame transmissions
2 T140 Rear Fenders complete with lights and luggage rack
Assorted Triple Trees:  3x TR6, 8x T120R, 3x Cub, steering damper rods, etc.
Assorted NOS and replated brake & cylinder hardware
Assorted NOS and replated hardware, pre-unit and unit
Assorted NOS and replated motor mountings, gas & oil caps, push rid tubes, fasteners
Assorted NOS valve springs, collets, covers, new valve guides, rocker shafts, rockers, etc.
Assorted Large case of camshafts, tappet guide blocks, cam followers, bushes, etc.
Assorted Sprockets, kicker parts, gear selectors, fuel taps, fork caps, dynamo parts
Assorted Clutch, kicker and primary parts
Assorted Bearings – main, wheel, etc., speedo drives, rod shells, clutch parts
Assorted Gears, pinions, axles, ignition, advance units, oil unions, fitter plates, & hardware
Assorted Clutches, hubs, plates, covers, new/used kickers (pre-unit & T120)
Assorted Tank mounting hardware, pre-unit gearbox adjusters, new pre-unit throttle
Assorted New wheel bearings, replated with hardware, oil pumps, pushrod tubes (unit & p/u), timing gears, kicker springs, valve cover caps
Assorted Complete sprung hub unit, disassembled
Assorted Headlights
Assorted Tail lights, old and new, 1 used pre-unit license plate mount
Assorted Airfilters, Triden Airbox, brake drum trims, NOS exhaust heatshields, tank parcel shelf, Boyer (Norton), tank trims (T120), 3 fork seal holders (T120)
Assorted Pre-Unit engine plates
Assorted Alternators
Assorted New primary and drive chains, 2x blade plates, 5xclock mounts, tool tray and tool box, 10x fork boot clips
Assorted 3x Pre-unit hubs, Primary parts, 11xTR6 inlet maifolds, sprockets, shift forks
Assorted NOS & used shocks and shrouds
4 Swingarms, 2x T120, 1x pre-unit, 1x BSA A10
15 Brake drums, brake plate, assorted shoes and new linings
Assorted Large box of NOS small parts
17 Assorted crankshafts, T120, Pre-unit, BSA A10
6 Wheels: 3x T120 Rear, 1x Early T120 Front, 1x Conical front, 1x Late T120 TLS
3 T120 Gas tanks
4 Chain guards: 2x TR6C, 1x T120, 1x Pre-Unit
2 Seat covers: T120: 1x grey top, 1x black
Assorted Pre-unit parts: footrests, brake pedals AND T120 Fender struts, kickers, sidestands
Assorted T120 footrests, kickers, brake pedals, 3x battery boxes
Assorted T120 gear sets
Assorted T120 & Pre-unit engine plates, various frame brackets
EXHAUSTS
4 T120 downpipes
5 T120 high pipes
5 pairs TR6R silencers
5 Pre-unit silencers
1 pair Norton/Triumph Pea-shooter
1 pair T140 silencers
FENDERS
10 Front, including 4x NOS Alloy, 2x NOS steel
4 Rear, including 1x NOS Alloy, 3x Steel (used)
SEATS
1 T120 (good pan)
1 BSA A65 (good pan)
1 Pre-unit (good pan)
1 Café Racer T120
17 Crankshafts, including 3x early Pre-unit, 1x Norton, 1x BSA A10 Racer, 12x T120